Vecdos eOne 150 HM

Vecdos eOne 150 HM

The Reinhardt-Technik Vecdos eOne-technology was especially developed to process highly viscous, PUR hotmelt adhesives that bond with liquid materials.

The system is based on volumetric piston metering units and works perfectly
in combination with the Reinhardt-Technik Warm Melt and Visco Star doubleacting
scoop piston pump feeding systems. It can also be integrated into other
systems.

Standard Features

  • Graphic touch panel provides clear overview
    of the system status
  • Intuitive PLC control for all process relevant parameters
  • Servo electric drive
  • Low power consumption
  • Low noise levels
  • Dynamic modification of the output rate
  • Full use of the robot power
  • Short cycle times possible
  • No change of operating materials necessary
  • Easy maintenance

TECHNICAL DATA

Vecdos eOne 150 HM

Dimensions: Length x width x height: 970 x 275 x 207 mm
Weight 44 kg
max. dosing volume (usable volume) 140 ccm
min. dosing volume (5mm Hub) 4,8 ccm
nominal volume 154 ccm
theoretical output 1480ccm/min
theor. filling time at 3000 1/min 5,7 sec
theor. filling time at 6000 1/min 2,9 sec
metering stroke 145 mm
min. metering time 0,5 cm/min
min. dosing duration (full stroke) 5,7 sec
max. feeding pressure 300 bar
min. fedding pressure 5 bar
max. operating pressure 200 bar
viscosity range 1-10.000.000 mPas
operating voltage 400 VAC 3/N/PE / 50/60 Hz other operating voltages on request